Main causes and signs of EPS failure in Acura, Jeep, Porsche cars

EPS malfunctions in Porsche cars

The cars of the German trade mark Porsche are known for their excellent quality and unique design. The electric power steering device in cars of this brand has its own distinctive features, but if the car has problems with EPS, the repair will not be too difficult.

Porsche EPS problems in cars of this brand are not too difficult.

Causes of Porsche EPS failure:

• The sensors that are responsible for transmitting information to the power system are broken
• Wear and tear of the contact nodes;
• Burnt fuses

Electric power steering is a complex mechanism, so repair of EPS requires special knowledge, skills and special equipment. It is not possible to carry out such repairs on your own.

One of the problems – are the fasteners, which are quite difficult to dismantle. If a breakdown occurs, you'll need the help of a craftsman who has the necessary diagnostic equipment and tools to repair it.

One of the problems – are the fasteners, which are difficult to remove.

Troubleshooting the EPS in Acura cars

Acura cars are reliable and high quality, but they can also require EPS repair.

Acura's EPS can be a problem.

Accurate diagnostics are needed to determine if your Acura's ESC is damaged.

Acura ESC failure can be identified by the following signs:

• Tightness of the steering wheel;
• You need to apply more force when turning;
• Vibration, knocks in the steering wheel.

The cause of EPS failure can be malfunctions in the control unit or mechanical damage.

The EPS requires regular diagnostics to ensure continued operation. All parts of the vehicle are interconnected, and failure of one part can cause further malfunctions.

Jeep Steering Column Repair

Jeep cars offer excellent performance and handling, but these vehicles have their share of troubles.

Repairing a steering column in Jeep

Drivers often ask: How much does it cost to repair a steering rack? The answer to this question can only be obtained after diagnostics at a workshop. Each breakdown has its own individual character and repair characteristics.

Any breakdown is different.

Repair of the electric power steering system is carried out in several stages:

• Before proceeding to repair, the wheels are set in a straight position;
• The paddle shifters are removed;
• Disconnect all wiring harnesses from the dashboard;
• Dismantle the lower part of the dashboard.

It is important when removing the EPS not to break the integrity of the contact assemblies and connecting wires, so repair work should be carried out only in a specialised car service.

EPS problems are easier to prevent than to fix. If the mechanism fails, the car becomes difficult to drive and this can cause an accident on the road. You should carefully choose a workshop to repair your EPS. In specialised car services to repair the steering rack, MSG Equipment is predominantly used. The company is the manufacturer of the controller MS561, which is necessary to check the performance of electric rack, columns and electrohydraulic pumps.

While operating any make of vehicle, there is a chance of EPS failure. The problem is signalled by a warning sign on the dashboard. If this signal appears on the dashboard or there are changes in the car's behaviour on the road, you should urgently visit a workshop for diagnostics and, if necessary, subsequent repair.

See the warning sign on the dashboard.