MS201
Test bench for diagnostics of shock absorbers

Test bench MS201 is intended for health assessment of all shock absorber types used in passenger cars and repair determination. Also, it can be used to perform a post-maintenance evaluation and check whether a shock absorber performance corresponds to its technical characteristics.
Manufacturer: MSG Equipment

Test bench MS201 provides reliable data concerning shock absorber technical condition and is used to perform the following procedures:

  • workshop diagnostics of shock absorber faults; 
  • seller verification of the match between shock absorber performance and its technical characteristics;
  • long-duration tests carried out by shock absorber manufacturers;
  • study of shock absorber performance run by research and development centers;
  • testing by racing teams to select shock absorbers with the required characteristics.

Features:

  • Diagnostics of shock absorbers equipped with all sorts of mounting mechanisms at different vibration frequencies.
  • Possibility to set a shock absorber stroke.
  • Two diagnostic modes: automatic and manual.
  • Test results can be compared.
  • Test results can be saved and printed.
  • Intuitive interface.
  • Conformity to safety requirements for operation.
  • Automatic software update, free.
Technical Specifications
Supply voltage, V
400
Power consumption, kW
3.7
Software update
available
Control
on the touch screen
Saving diagnostic results
available
Printing of diagnostic results
available on an external printer (printer not included in the scope of supply)
Internet connection
Wi-Fi (802.11 a/b/g/ac)
Connection of peripheral devices
2 x USB 2.0
Width, m
0,97
Depth, m
0,48
Height, m
2,5
Weight, kg
350
Working pressure of pneumatic line, bar
from 6 to 8
Maximum size of the shock absorber to be diagnosed, mm
780
Minimum size of the shock absorber to be diagnosed, mm
250
Adjusting the shock absorber mounting height
manual
Piston rod stroke adjustment, mm
from 50 to 150
Permissible load at compression/rebound stroke, kg
1000
Maximum frequency of shock absorber vibrations, min-1
180
Minimum frequency of shock absorber vibrations, min-1
10
Measurement of shock absorber temperature
available
Power source
three-phase electrical network and compressed air supply line
Video overview
Related videos
Превью видео
Превью видео
Превью видео
Превью видео
Превью видео
Related Products
MS200
Devices for refueling shock absorbers
The system is used for filling mono-tube and twin-tube shock absorbers with gas after repair.
Materials about MS201 to download:
Format
Name
Latest update
26/02/2025

Viewed products

MS800A
Tester for diagnostics of battery hybrid and electric vehicles
Number of channels for module test
12
Charge rate, A
from 0.1 tо 4.5
Discharge rate, A
from 0.1 to 5 (limited to 50 W per channel)
User interface language
ENG
Number of channels for module test
12
Charge rate, A
from 0.1 tо 4.5
Discharge rate, A
from 0.1 to 5 (limited to 50 W per channel)
User interface language
ENG
Tester for diagnostics of battery hybrid and electric vehicles Tester for diagnostics of battery hybrid and electric vehicles
Best seller
MS800
Tester for diagnostics of battery hybrid and electric vehicles
Number of channels for module test
36
Charge rate, A
from 0.1 tо 4.5
Discharge rate, A
from 0.1 to 5 (limited to 50 W per channel)
User interface language
ENG
Number of channels for module test
36
Charge rate, A
from 0.1 tо 4.5
Discharge rate, A
from 0.1 to 5 (limited to 50 W per channel)
User interface language
ENG
Stand for washing of particulate filters (DPF, FAP) Stand for washing of particulate filters (DPF, FAP)
Best seller
MS900ABC
Stand for washing of particulate filters (DPF, FAP)
Working pressure of pneumatic line, bar
from 6 to 8
Working fluid
water
Type of filters to be flushed
DPF (DPF + SCR), FAP (FAP + SCR), GPF
Air temperature drying, °C
up to 80
Filtering system for the flushing liquid
• tank filter; • hydrocyclone; • 3 BB20 filters (5-20 microns).
Working pressure of pneumatic line, bar
from 6 to 8
Working fluid
water
Type of filters to be flushed
DPF (DPF + SCR), FAP (FAP + SCR), GPF
Air temperature drying, °C
up to 80
Filtering system for the flushing liquid
• tank filter; • hydrocyclone; • 3 BB20 filters (5-20 microns).