New
MS800A
Tester for diagnostics of battery hybrid and electric vehicles
The MS800А tester is designed for diagnosing high-voltage nickel-metal hydride (Ni-Mh) and lithium-ion (Li-ion) batteries in hybrid and electric vehicles. The tester provides simultaneous testing of 12 battery modules.
Manufacturer:
MSG Equipment
Overview
The MS800A tester is used during the repair of high-voltage batteries in hybrid. The tester can determine the capacity of nickel-metal hydride (Ni-Mh) and lithium-ion (Li-ion) batteries of various types: NMC, NCA, LFP. The battery module diagnostic (balancing) process occurs automatically. The tester incorporates protective systems to prevent battery module damage during diagnostics.
MS800A stores all measured data during the battery module diagnostic (balancing) process in its memory. These data can then be reviewed and analyzed on a PC using the TesterLogReader software, which you can download and use for free.
Capabilities of the tester MS800:
- Diagnoses high voltage battery modules, determining their capacity.
- Charges sequentially connected cells of batteries that are unbalanced over time.
- Prepares the battery for installation on the car by balancing all modules by voltage.
- Prepares modules for storage, charging them to a certain level.
Features:
- 12 independent, galvanically isolated, battery module test (balancing) channels (Ni-Mh or Li-Ion).
- Automatic operating mode.
- Battery module protection against:
- overcharging/discharge;
- overheating;
- incorrect connection (wrong polarity). - Saving diagnostic results.
- Convenient viewing and analysis of diagnostic results.
- Management and control of the diagnostic process through a touchscreen.
- Free software update.
Supply voltage, V
230
Power consumption, kW
1.2
Software update
available
Types of protection
- against polarity reversal; - short-circuit of the connected cable; - from overheating.
Saving diagnostic results
available
Connection of peripheral devices
1 x USB 2.0
Width, m
0,64
Depth, m
0,32
Height, m
0,22
Weight, kg
22
Number of channels for module test
12
Max. channel voltage for Ni-Mh, V
20
Max. channel voltage for Li-Ion, V
4.2
Charge rate, A
from 0.1 tо 4.5
Discharge rate, A
from 0.1 to 5 (limited to 50 W per channel)
Power source
single-phase electrical network
Video overview
Training course on diagnostics and repair of high-voltage batteries for hybrid and electric vehicles
Click the link to learn more about the course
Related Products
MS800
Tester for diagnostics of battery hybrid and electric vehicles
The MS800 tester is designed for diagnosing high-voltage nickel-metal hydride (Ni-Mh) and lithium-ion (Li-ion) batteries in hybrid and electric vehicles.
Number of channels for module test
36
Charge rate, A
from 0.1 tо 4.5
Discharge rate, A
from 0.1 to 5 (limited to 50 W per channel)
Number of channels for module test
36
Charge rate, A
from 0.1 tо 4.5
Discharge rate, A
from 0.1 to 5 (limited to 50 W per channel)
New
MS801
Tester for diagnosing lithium battery modules of electric and hybrid vehicles
The MS801 tester is designed for diagnosing lithium-ion modules of high-voltage batteries in electric and hybrid vehicles, as well as 48-volt batteries of "mild hybrids" (MHEV).
Number of channels for module test
16
Charge rate, A
from 1 to 90
Discharge rate, A
from 1 to 90
Number of channels for module test
16
Charge rate, A
from 1 to 90
Discharge rate, A
from 1 to 90
Materials about MS800A to download:
Format
Name
Latest update
Ask a Question
Thanks for your question!
We will try to respond as quickly as possible.